Speaking on Deep Background, the Press Secretary whispered:
My company is investigating the use of wireless in a couple of our conference rooms. Aside from limiting the scope of reception with various directional antennae, does anyone have any suggestions or pointers for other ways to limit the propagation of signals (i.e. special shielding paint, panels or other wall coatings)?
As I told Andy, you need a "RayProof" or similar brand shielded conference room. This is Faraday Cage, with a tight-fighting door, etc. I don't know what they cost, but I've installed one or 2. Outside of labor, I suppose they might be in the $50-500K range or so, for small (12'x6') ones. Note it's a PITA to keep tight; as the door needs very tight-fitting gaskets. You'll need to bring phone/Ethernet in over fiber, but that's not hard. -- A host is a host from coast to coast.................wb8foz@nrk.com & no one will talk to a host that's close........[v].(301) 56-LINUX Unless the host (that isn't close).........................pob 1433 is busy, hung or dead....................................20915-1433