Not *exactly* what you're asking for, but a Lanner appliance (http://www.lannerinc.com/products/network-appliances/x86-rackmount-network-a...) might suit your needs. M. Original Message From: David Sotnick Sent: Friday, April 15, 2016 16:19 To: NANOG Subject: 10G-capable customer router recommendations? Hello masters of the Internet, I was recently asked to set up networking at a VIP's home where he has Comcast "Gigabit Pro" service, which is delivered on a 10G-SR MM port on a Comcast-supplied Juniper ACX-2100 router. Which customer router would you suggest for such a setup? It needs to do IPv4 NAT, DHCP, IPv4+IPv6 routing and have a decent L4 firewall (that also supports IPv6). The customer pays for "2Gb" service (Comcast caps this at 2G+10% = 2.2Gbps) and would like to get what he pays for (*cough*) by having the ability to stream two 1Gbps streams (or at least achieve > 1.0Gbps). I'm tempted to get another ACX-2100 and do a 4x1Gb LACP port-channel to the customer switch, or replace the AV-integrator-installed Cisco SG300-52P (Cisco switch with e.g. an EX-3300 with 10Gb uplinks). Thanks in advance for your suggestions. -Dave