ASR 1000 does not run XR. You probably mean XE. The high availability features that requires maintaining state and stateful switch over never seem to work out of the box on early releases and need some time until the feature gets mature. I've found this across different vendors. The dual IOS process works best with two Routing Engines/ESPs on higher models. contact your local vendor engineering representatives asking them for more details on the the ASR1K High Availability features and they should tell you how it works in detail. Regards, Ahmed Sent using BlackBerry® from mobinil -----Original Message----- From: Mark Tinka <mtinka@globaltransit.net> Date: Mon, 23 Jan 2012 22:58:45 To: <nanog@nanog.org> Reply-To: mtinka@globaltransit.net Subject: Re: juniper mx80 vs cisco asr 1000 On Friday, January 20, 2012 04:34:56 AM Thomas Donnelly wrote:
The warm standby IOS is a nice feature for in service upgrades and crash avoidance.
Except that some times, it did lead to crash (for us anyway), because it eats up half the router's memory, and if you're running 3x full tables or more, you ran out of the other half and BOOM! And that was IOS XR 2, which is generally old now. We now turn off software redundancy now on all ASR1000 boxes that don't have a 2nd RP. Mark.