In this case, however, what's being seen is simply valid traffic 
which was most likely erroneously redirected through an 
internal encryption device.

I would hazard a guess the folks involved have already jumped 
on checking the redirector rules to fix the leakage which allowed 
external IPs to be passed through the internal encryption pathway.

I helped build the system that's causing those messages, so I have 
a bit of a guess as to what the issue is.  I'm no longer an employee,
however, so I can't fix the issue.  But in this case, those boxes really 
aren't trying to attack you--they just aren't supposed to be sending 
traffic externally like that.  

So, it actually is good to speak up about this traffic--because it's a fixable 
issue, and one that should be addressed at the source.

Thanks!

Matt
#notspeakingofficiallyforanyoneoranything


On Fri, Dec 18, 2020 at 9:05 PM Dobbins, Roland <Roland.Dobbins@netscout.com> wrote:


On Dec 19, 2020, at 01:19, Frank Bulk <frnkblk@iname.com> wrote:

Curious if someone can point me in the right direction. In the last three
days our core router (Cisco 7609) has logged the following events:

Dec 16 19:04:59.027 CST: %CRYPTO-4-RECVD_PKT_INV_SPI: decaps: rec'd IPSEC
packet has invalid spi for destaddr=<redacted>, prot=50,
spi=0xEF7ED795(4018067349), srcaddr=68.180.160.18, input interface=Vlan20

It should be noted that attackers will sometimes generate non-TCP/-UDP/-ICMP DDoS attack traffic which is intended to bypass ACLs, firewall rules, etc. which only take the more common protocols into account. They'll often pick ESP (protocol 50, AH (protocol 51), or GRE (protocol 47) in order to try & masquerade the attack traffic as legitimate VPN or tunneled traffic.

And the source IPs of this attack traffic are frequently spoofed, as well. 

--------------------------------------------

Roland Dobbins <roland.dobbins@netscout.com>