https://mikrotik.com/product/crs312_4c_8xg_rm Regards, Nathan Babcock President - Straight Shot Wireless O: 575-208-7915 <http://www.sswireless.net/> From: NANOG <nanog-bounces@nanog.org> On Behalf Of Mauro Gasparini Sent: Thursday, May 14, 2020 7:46 AM To: Mehmet Akcin <mehmet@akcin.net> Cc: nanog <nanog@nanog.org> Subject: Re: Switch for SFP+ Thank you. The problem is that to get a price lower than U$D 3000 I have to resort to a used device. El 14/5/20 a las 01:08, Mehmet Akcin escribió: Used Juniper QFX5100-48T will do it. Probably overkill but you can grab one cheap @ebay On Wed, May 13, 2020 at 16:36 Mauro Gasparini <mjgasparini@gmail.com <mailto:mjgasparini@gmail.com> > wrote: Good afternoon. I'm looking for a switch with the following capabilities: . transport for more than 20 gbps . link aggregation LACP . slots for SFP+ . seamlessly when trunking vlans through the link aggregation. And essentially that doesn't exceed US$D 2000 and is compatible with 10GBASE-ER and/or 10GBASE-ZR modules that are not from the vendor itself (e.g. SPFs: Huawei, Mikrotik, Sumitomo, OEMs). If any of you have a good experience with a device that meets these requirements (which are minimal with the exception of price and compatibility) ? Regards. Mauro Gasparini -- Mehmet +1-424-298-1903