Re: Cross connecting two routers with channelized interfaces

Yes, u will have to connect the fibers in a cross manner..and setup one side to generate the clock.. Faisal On May 16, 2012, at 8:09 AM, Diogo Montagner <diogo.montagner@gmail.com> wrote:

Hello,

sorry for this dumb question.

Is it possible to connect two routers like below ?

RouterA/cstm1 ---- dark fiber ---- cstm1/RouterB

The interfaces used in this case are channelized STM1 in both sides. Between RouterA and RouterB I would like to create many low-speed interfaces ranging from 64Kbps up to 2Mbps. Between these two routers there is no MUX.

The framing mode has to be SDH.

Thanks in advance!

Diogo