On Sat, Sep 13, 2003 at 08:11:52PM -0700, Michel Py wrote:
Rodney,
Rodney Dunn wrote: Thanks for pointing that out. I'll have it removed from the CLI for any platforms where it's not supported.
Actually, there's nothing to remove. The
cisco7507#reload ? LINE Reason for reload
Is perfectly legitimate.
I agree. But it shouldn't accept the command even though it's not visible. 75xx_Lab#sh ver | incl IOS IOS (tm) RSP Software (RSP-JSV-M), Version 12.3(2)T, RELEASE SOFTWARE (fc1) 75xx_Lab#rel warm System configuration has been modified. Save? [yes/no]: yes Warning: Attempting to overwrite an NVRAM configuration previously written by a different version of the system image. Overwrite the previous NVRAM configuration?[confirm]n No action taken because command was not confirmed Proceed with reload? [confirm]n
The currently supported platforms are: 3660 and 3745 in 12.3(2)T 7200 in 12.2(18)S I'll also check on future platform implementations and let you know. While at first the feature seems platform independent it turns out there are some platform dependencies.
If I may, it would be a hell of a good idea to make it work on platforms such as the 7500 where one would think it is un-necessary. On paper, having a feature set with rpr/rpr+ would render this command un-necessary on a 7500 with dual RSPs. In practice, there are so many compatibility issues with rpr/rpr+ and other features that some 7500s that have dual RSPs run a non-rpr image and the second RSP is sitting in the router as a spare.
Sure you may. I'll check with the 7500 group and let you know what the plans are for this platform. Rodney
Michel.