I am not sure what is happening for you, but as a general rule of thumb I don't run per-packet load sharing on circuits that are not 'the same'. The need for packet re-ordering goes way up when you are running per-packet on two types of circuit. Are the circuits provisioned for the same speed at least? -jf On Thu, 10 Oct 2002, Adam Atkinson wrote:
per-packet load sharing in cef / dcef just doesn't seem to want to work.
I have two 7500s joined by a frame relay link and a fast ethernet.
Traffic is coming in to one of the 7500s via a third link, and goes to a loopback on the second 7500.
I have cef turned on
I have "ip load-sharing per-packet" on every interface
The FR and FE have the same ospf cost
The routing tables and "sh ip cef" agree that there are two equal paths to the loopback.
But all the traffic goes over one link.
I've been through Cisco troubleshooting documents etc. and as far as I can see, everything is perfect.
Also, a deja search reveals plenty of other people with similar problems, and no solutions I can see. Are we all missing something obvious?
-- Adam Atkinson