Once upon a time, Joe Greco <jgreco@ns.sol.net> said:
Now of course we have no idea what's going to be mounted in this, but it's an HP rack so I assume maybe HP servers, which tend towards the heavy.
One thing about using a 2-post rack for servers that can be a problem is that most 2-post racks I've seen have tapped holes, ready for screws, and some server rails (such as Dell) pretty much require square hole or round hole racks instead. You can get third-party server rails that will work with a tapped hole rack, but that's an extra expense (and irritation).
That's a good point. Without knowing the intended equipment load, it is difficult to give good advice on this part. However, since it's an HP rack, an obvious guess might be HP servers, and I will note that the HP rails I've seen, while designed for square or round hole racks, do allow the little peglets to be removed, and are then compatible with most racks I've seen. Unfortunately they have a thread-lock compound on them, so be prepared to sit down with a flat blade power screwdriver and some pliers; removal is about 2 minutes per set of rails that way. I've come to like the HP server gear a whole lot more than Dell over the years. Little things like that are one of the reasons. ... JG -- Joe Greco - sol.net Network Services - Milwaukee, WI - http://www.sol.net "We call it the 'one bite at the apple' rule. Give me one chance [and] then I won't contact you again." - Direct Marketing Ass'n position on e-mail spam(CNN) With 24 million small businesses in the US alone, that's way too many apples.