Here are the pictures again. http://imgur.com/a/w8clL -----Original Message----- From: Bjørn Mork [mailto:bjorn@mork.no] Sent: Tuesday, February 02, 2016 4:16 AM To: Christopher Morrow <morrowc.lists@gmail.com> Cc: Erik Sundberg <ESundberg@nitelusa.com>; nanog@nanog.org Subject: Re: Devices with only USB console port - Need a Console Server Solution Christopher Morrow <morrowc.lists@gmail.com> writes:
seems like a total improvement.... swapping 1 well known, simple cable for 2...
hurray progress?
The USB port is probably cheaper than anything else. And it gives them more flexibility. No need for both an RS232 and Ethernet console port. The USB port can be both, depending only on driver/application support on the router. And you have other options as well. Wifi console maybe? Or a direct USB-USB cable (with the necessary logic to appear as a device to both ends). It is also possible to create USB only console servers, if the market wants that. Avoiding two RS232 conversions per console port will save enough capacitors to run a Tesla. Whether these alternatives become available is of course up to Cisco. You do need the driver and application support on the router. Time will show what they come up with. Bjørn ________________________________ CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error please notify the sender immediately by replying to this e-mail. You must destroy the original transmission and its attachments without reading or saving in any manner. Thank you.