All followups to cidrd only plz... ------------------------------------------------------------------------ The CIDR FAQ | Version 2 | 21 August 1995 ------------------------------------------------------------------------ The following document is a collection of Frequently Asked Questions about CIDR. This document is not meant to be a networking/routing guide and tutorial. Where appropriate pointers to other documents of a more general nature have been mentioned. Updates from a previous version are marked with a '|' in column 1. If you have any questions you would like added, please send them to the editor mentioned below: Hank Nussbacher (Tel Aviv University and IBM Israel) hank@vm.tau.ac.il or hank@ibm.net.il If you would like to "discuss" items from this FAQ please send your mail to cidrd@iepg.org This FAQ is being distributed to the following groups and lists: alt.internet.services alt.internet.access.wanted nanog@merit.edu inet-access@earth.com iap@vma.cc.nd.edu local-ir@ripe.net cidrd@iepg.org To retrieve the most up-to-date version of this document: - anonymous FTP: ftp.ibm.net.il/pub/docs/cidr.faq ------------------------------------------------------------------------ General questions ----------------- 1. What does CIDR stand for? CIDR stands for Classless Inter-Domain Routing and is documented in RFC1517/1518/1519/1520. CIDR is an effective method to stem the tide of IP address allocation as well as routing table overflow. Without CIDR having been implemented in 1994 & 1995, the Internet would not be functioning today. Basically, CIDR eliminates the concept of class A, B, and C networks and replaces this with a generalized "IP prefix". CIDR can be used to perform route aggregation in which a single route can cover the address space of several "old-style" network numbers and thus replace a lot of old routes. This lessens the local administrative burden of updating external routing, saves routing table space in all backbone routers and reduces route | flapping (rapid changes in routes), and thus CPU load, in all | backbone routers. CIDR will also allow delegation of pieces of what use d to be called "network numbers" to customers, and therefore make it possible to utilize the available address space more efficiently. See question #6 below for details on "IP prefix"s. 2. What is an ASN? ASN stands for Autonomous System Number and acts to merge many networks into a logical domain. 3. What is BGP? BGP stands for Border Gateway Protocol and is the de-facto standard for routing between Autonomous Systems in the Internet. All communications between Internet Service Providers (ISP) is handled via BGP4 which supports CIDR. 4. Why should I make the effort and convert my routing to be CIDRized? The routing tables in the Internet have been growing as fast as the Internet and the router technology specifically and computer technology in general has not been able to keep pace. In December 1990 there were 2190 routes and 2 years later there were over 8500 routes. In July 1995 there are now over | 29,000 routes, which require approximately 10 MB in a router with a | single peer. Routers at interconnection points (or multi-homed | hosts doing full routing with many peers) receive these routes from | several peers, and need several dozen megabytes of RAM (and the | appropriate CPU horsepower) to handle this. A list of those routers | that can handle this appears at the end of this question. Routers with 64MB of memory have the capacity for approximately 60,000 routes after which some routes will just have to be left out of the global routing tables, and the more likely ones to be left out are routes covering small pieces of address space. Without the CIDRization work that has gone on for the past 2 years the routing tables would be in excess of 65,000 routes. By CIDRizing you help the Internet reduce the routing overload as well as increasing the liklihood that in the future your routes will be carried by all ISPs. The major benefit of CIDR is to allow for continuous, uninterrupted growth of the Internet. For a significant percentage of sites connected to the Internet the value of the Internet increases with the total number of sites connected to the Internet. Therefore, taking steps needed to allow for continuous uninterrupted growth (like CIDRizing, or renumbering) is beneficial to such sites. The routers today that are available to handle the full routing table are: | cisco 7000 w/ 64Mb cisco 4500 w/ 32Mb | IBM ENSS w/ 64Mb | BayNetworks models AN/ASN/BLN/BCN w/ 32Mb 5. Can you give an example of a simple CIDR configuration for a cisco router? The following example creates 2 aggregates and suppresses any more specific addresses that may be contained within those aggregates. The access-list causes only those nets to be distributed as listed, and not any others that may exist in the BGP routing tables. router bgp 64100 no synchronization aggregate-address 172.16.0.0 255.248.0.0 summary-only aggregate-address 192.168.50.0 255.255.255.0 summary-only neighbor 192.168.54.2 remote-as 65000 neighbor 192.168.54.2 distribute-list 12 out default-metric 70 ! access-list 12 permit 192.168.50.0 0.0.0.255 access-list 12 permit 172.16.0.0 0.7.255.255 An alternate method is via network and route statements: router bgp 64100 no synchronization network 172.16.0.0 mask 255.248.0.0 network 192.168.50.0 mask 255.255.255.0 neighbor 192.168.54.2 remote-as 65000 neighbor 192.168.54.2 default-metric 70 ip route 172.16.0.0 255.248.0.0 Null0 254 ip route 192.168.50.0 255.255.255.0 Null0 254 In this case, only those routes explicitly mentioned in "network" statements will be announced with BGP. For these routes to be announced, there has to be a corresponding route in the IP forwarding table, thus the need to create the static routes. The static routes will also serve as "pull-ups" for the route advertisements and thus prevent route flapping: these routes will always be announced with BGP by this router. Note that as long as more specific routes exist internally in your network, these will be used in preference to the static "less specific" route entries (longest prefix matching is being used). A good rule to follow is to never redistribute IGP learnt routes directly into BGP, but to rather use network or aggregate-address statements. And if you must redistribute dynamically learnt IGP routes into BGP, you MUST use filtering. The reasons for this advice are several, some of which are: 1) if your IGP is classful (e.g. RIP or IGRP) you will by default not do any route aggregation 2) if you have an internal stability problem (accidents do happen), this will be reflected as a "route flap" in the whole routing system, globally burning CPU cycles better spent on other things 3) if the IGP -> BGP transition is unrestricted, this can lead to false routing information escaping from your network (especially if you do not fully have administrative control over your IGP) 6. What do all these /16s and /24s mean in my BGP tables? This refers to the number of bits of the network part of the IP address. A former class B may appear as 172.50.0.0/16, which is the same as 256 class C's which can appear as 192.200.0.0/16. A single class C appears as 192.201.1.0/24. These "things" are often called an "IP prefix", which consists of an IP address and a mask length. The mask length specifies the number of leftmost contiguous significant bits in the corresponding IP address. Thus, an IP prefix with a prefix length of 15 (denoted /15) covers the address space of 128k IP addresses, and a /17 covers the address space of 32k IP addresses. Here is a table of the more popular CIDR blocks: # of former CIDR class C block nets ---- ---- /27 1/8 /26 1/4 /25 1/2 /24 1 /23 2 /22 4 /21 8 /20 16 /19 32 /18 64 /17 128 /16 256 = 1 former class B /15 512 /14 1024 /13 2048 In general, advertising a prefix covering less address space than a /24 prefix will probably not get into the global routing tables, and global Internet connectivity is less likely to happen. Note that for you as an administrator of an AS, it is a good idea to announce as few prefixes as possible and to utilize the address space as much as possible. 7. Do I need to carry the full Internet routing table? When would it be necessary? What routers on the Internet carry full routing tables and how much memory is needed? No you do not need to carry the full Internet routing table. If you are single-homed, meaning you have a single connection to an ISP, then all you need to do is point a default route to the ISP and tell your ISP not to send you the full routing table. If you are multi-homed, you will want to know which nets to route via connection A and which nets to route via connection B. The easiest way to do this is to request a partial routing table from one ISP - with those nets that are closest to them, and default everything else to the other ISP. This way your routing tables need not contain the entire Internet universe but only a small subset. The closer you get to the hub or nexus of the Internet, the larger your routing tables need to be. For example, those connected to public exchange points (like the NAPs, CIX, STIX, LINX, dGIX) in general, carry full routing tables and run without a default route. 8. What is there in the Internet to stop me from making a mistake and announcing via BGP an aggregate that is larger than the nets I am in charge of? In principle there is nothing to stop you. The responsibility falls on both ends of the BGP link - you are responsible to filter what you announce and the receiving end - if it has its act together - filters also what it *thinks* it should be hearing from you so as prevent mistakes on your part. Those sites that do not work with access lists and filters and just readily accept what is sent to them are just waiting for a problem to happen. Filtering can either be done at the IP network level or at the BGP path (BGP orgin AS) level. See question 20 below for details on a tool to assist in filtering. 9. Who has to renumber with CIDR ? Sites that move from one ISP to another, and who had been allocated addresses from their original ISP's CIDR block, in all likelihood will have to return those addresses as part of the move. The reason is to keep the number of prefixes in the global routing system within the limits of current technology. Specific questions ------------------ 10. I have a /16 but have registered parts of it as /24s in the RADB. I now want to CIDRize. The problem is parts of the /16s are missing and are routed via a different ASN. Can you explain how more specific routes override more general ones and will I hurt my routing if I just advertise the /16 and not a bunch of /20s and /21s? There are two aspects to the answer: 1) Real (BGP) world: Given there are several AS's sharing addresses out of a /16 prefix, every AS should advertise exactly those prefixes which it is really originating. However, if there is one AS "originating" a significant majority of this address space, the concerned AS's might agree that this one and only advertises the /16 and all others their more specifics. The more specifics always take precedence over the less specific. 2) Routing registry: The registry DB, of course, should always reflect reality. If in the above example the AS's agree on the "big AS" announcing the /16, the "big AS" should document with the route-object that it's not really originating the whole aggregate by using "hole" attributes (see ripe.181, 5. The Route Object). 11. How can I redistribute our IGP routes (IGRP) so that they become aggregated when sent out via BGP? It is strongly discouraged to redistribute IGPs into BGP, because local IGP configuration errors might easily corrupt routing information of the whole Internet. If, however, you have to do it anyway, you MUST use strict distribute-lists with explicit permits (or route-maps) for redistribution. Here is an example for a Cisco configuration: router bgp 64100 aggregate-address 192.168.0.0 255.255.192.0 summary-only aggregate-address 172.16.0.0 255.254.0.0 summary-only redistribute igrp 64100 route-map origin-AS64100 ! ! or: ! redistribute igrp 64100 ! distribute-list 10 out igrp 64100 ! route-map origin-AS64100 permit 10 match ip address 10 ! access-list 10 permit 192.168.0.0 0.0.63.0 access-list 10 permit 172.16.0.0 access-list 10 permit 172.17.0.0 This example would generate one route 192.168/18 and one route 172.16/15 if any of the contained networks is in the IGP. 12. I am multihomed to three ISPs and can only CIDRize to two of them but to the third I need to still announce specific nets. What damage will this do to my AS? No damage can be done if the non-CIDR peer does not further announce your specifics to the global Internet. If your non-CIDR ISP DOES announce your specifics to the global Internet those specifics will have preference over the less specifics and therefore all traffic to you will get routed through the non-CIDR ISP. 13. I don't want to CIDRize. Can someone do proxy aggregation for me? Proxy aggregation should only be done with great care and should be avoided if you are not single-homed ! If you are single-homed ask your ISP. | Others may proxy aggregate over your address range without your | consent, and send your traffic over paths/links not of your | choosing. Use of Routing Registries may help to identify and | correct these problem areas. |14. What routers on the market today do support CIDR (classless | routing)? | Routers that are capable of handling CIDR are: | | - all Cisco routers running 10.0 or higher | - all Bay Networks routers running 8.01 or higher | - 3Com Netbuilder II and Netbuilder Remote Office | - Telebit EMPB | - Unix w/ BSD/OS 2.0 w/ gated 3.5alpha_11 + radix-fixes | - IBM 2210 routers 15. How do I reach other parts of a subnetted old-style network when I have only partial routing information for that same old-style network?" There are actually three ways to solve this particular problem with Cisco's software. Which of them applies will depend on what software version is involved: o Preferred solution: turn on "ip classless" in your routers and use a default route inside your AS. The "ip classless" command prevents the existence of a single "subnet" route from blocking access via the default route to other subnets of the same old-style network. o Workaround for 9.1 or later software where the "ip classless" command is not available: install a "default network route" like this: "ip route 39.0.0.0 255.0.0.0 next-hop" along the axis your default route would normally take. o Workaround for 9.0 or older software: create a "default subnet route": "ip route 39.x.y.0 next-hop" combined with "ip default-network 39.x.y.0", otherwise as the 9.1 fix. Both of the latter solutions rely on static routes, and in the long run these will be impossible to maintain. In some topologies the use of static routes can be a problem (e.g. if you have more than one possible exit point from your AS to choose from). Supplemental information ------------------------ The following information is presented as supplemental information that is related to the CIDRization process. 16. What is the Internet Routing Registry? The IRR is a way for ASN's to publicize their own intended routing policies without having to request a change from a go-between. | The RAdb which stands for the Routing Arbiter Data Base, which is part of the IRR, is part of a joint project between Merit and ISI. For full details contact: http://www.ra.net/routing.arbiter/RA/index.html. The Routing Arbiter is a project of the US National Science Foundation. As part of that project, it runs a routing registry database. That database (the RAdb) forms part of the IRR collection of databases. The RIPE database is not part of the RAdb but does participate in the IRR. At present, there are five entities that contribute to the IRR effort and more are expected. Today, all the contributing registries use the RIPE-181 database format. | All IRR participants can be contacted via automail handlers that accept batch updates via email. An example of a routing update appears below: password: xxxxxxxx *rt: 138.134.0.0/16 *de: NET-IEC *or: AS378 *mb: AS378-MNT *ch: hank@aristo.tau.ac.il 950724 *so: RIPE The *rt: tag identifies the net and the routing policy is based on *or: tag. An example of a routing policy is presented below: aut-num: AS378 descr: ILAN descr: Israeli Academic and Research Network as-in: from AS1755 100 accept ANY as-in: from AS174 100 accept ANY as-in: from AS3339 100 accept AS3339 as-out: to AS1755 announce AS378 AS3339 as-out: to AS174 announce AS378 AS3339 as-out: to AS3339 announce ANY default: AS174 10 default: AS1755 20 default: AS3339 30 guardian: HANK@vm.biu.ac.il mnt-by: AS378-MNT admin-c: Hank Nussbacher tech-c: Hank Nussbacher changed: hank@vm.tau.ac.il 950627 source: RIPE For further details read over ripe-120.ps, ripe-121.ps and ripe-181.ps (via anonymous ftp from info.ripe.net/ripe/docs). 17. How do I update the registered routing information for my ASN? You need to submit a "route" object update and perhaps an "aut-num" object update (see examples above). Route objects add new nets to your autonomous system (or you can remove nets from your autonomous system) and the Autonomous-system object describes the type of routing you wish to have. 18. Which Routing database takes precedence? RIPE? RADB? MCI? Do I have to update all of them? | Each provider is allowed to select the preference order for | authentic data. For example, ANS uses the following precedence: | ANS, CANET, MCI, RIPE, RADB If there are two routes (with different origins) within one database, the changed date is used as a tiebreaker. Else, only database precedence is used. Thus, if the RADB entry has a more recent changed date than the RIPE, ANS will use the RIPE entry. | You should only have to register in one of the IRR component | databases. |19. How do I check what is registered in the IRR? The tool to use is whois. A few examples make the command self explanatory: whois -h whois.ra.net 128.228.0.0 whois -h whois.ripe.net as378 whois -h whois.canet.ca 142.77.0.0 20. Is there a tool to automatically create route filters based on IRR information? rlc is a route list compiler which is a subset of nlc/alc that allows the generation of route based filters (cisco access- lists) by extracting the nets belonging to an AS or AS MACRO from a routing database (i.e. Ripe Routing Database). In addition, it supports a limited set of functions to generate AS based filter lists. rlc is fully classless, and hence supports CIDR routes and subnets, as well as host routes. Source: ftp://dxcoms.cern.ch/pub/ripe-routing-wg Author: Jean-Michel Jouanigot, CERN <jimi@dxcoms.cern.ch> Contributors: Christian Panigl - Vienna University, Austria Bill Manning - ISI Tony Li - Cisco Systems Havard Eidnes - SINTEF, Norway Yakov Rekhter - Cisco Systems