That's kinda what I was talking about. That command isn't that bad actually. MQC and juniper firewall filters (in set mode) are no simpler. The annoying part is the obscurity. Sent from my iPhone On Nov 24, 2011, at 11:38 PM, Jonathon Exley <Jonathon.Exley@kordia.co.nz> wrote:
Yeah, I guess Cisco IOS isn't that good an example of a consistent syntax. Others do it better - Junos sets the ASN with the 'routing-options autonomous-system' command, and TiMOS uses 'router autonomous-system'
My rant wasn't about having to deal with new CLIs but about the lack of CLIs in those devices that seem to prefer menu based UIs (text or web), and CLIs that have nasty commands. Check this out:
add flow fid-5-5 EVC-30600-Data codefault enable multi swap 99968000 100032000 1024 1024 5000 ctag push 15-0 stag none
Now what does that string of numbers mean? It's the Adva 825 way of specifying the CIR and EIR for a flow but I can never remember what each position represents.
Compare this to TiMOS:
sap-ingress 93 create
description "Test LNS"
queue 1 create
rate 2000
mbs 25 kilobytes
exit
This creates a queue with max rate 2000 kbit/s and a max burst size of 25 kB. It's much easier to read than the Adva config, because each parameter is labelled.
The Adva CLI isn't actually all that bad, but it's possible that had their developers had some sort of usability guide when they wrote the OS then they might have done things better.
I was hoping that there was already some sort of usability guide around that could be shown to the manufacturers with a "please read this" note attached. Is anyone aware of such a thing?
Jonathon.
From: Keegan Holley [mailto:keegan.holley@sungard.com] Sent: Friday, 25 November 2011 4:12 p.m. To: Jonathon Exley Cc: nanog@nanog.org Subject: Re: Network device command line interfaces
I may have a different opinion here, but I not sure I'd call any CLI easy to work with. Cisco's training machine is so efficient that some learn IOS before leaving high school, so the fact that we all consider IOS easy to work with is relative. Just look at the "router" command. Most of us know that this is cisco's way of enabling protocols, but I would hardly call this intuitive if I didn't know it already. Then it's different for each protocol. So "router BGP #" starts the BGP process and sets your local AS number (very important). "router eigrp #" starts eigrp and sets a different AS number that doesn't really count (also important). "router ospf #" just sets a process ID in case you want to run multiple instances. There's also a config mode autonomous-system command but that only counts if your running EGP which is still in the CLI but isn't supported and doesn't start. Then there's all the different things you can/must do with access-lists because they were too lazy to code a different sort of filter. Remember CBAC? Did I mention this is the CLI we like? I don't mind wrestling with a new CLI because it's all relative. Most have read at least one cisco book and probably one juniper book so those CLI's are considered standard and all their sins are forgiven. Most of us have not gone through, training with extreme, enterasys, 3COM, netgear, foundry, fortigate, etc. etc. etc. So those become the PITA CLI's and suddenly non-standard commands and bad help menus become a crime again. I do find text-based menus obnoxious, unless it's a linux box and the text menu is a curses interface. In that case it's super-cool and I'm even willing to play games with text based menus.
2011/11/23 Jonathon Exley <Jonathon.Exley@kordia.co.nz<mailto:Jonathon.Exley@kordia.co.nz>> Does anyone else despair at the CLIs produced by networking vendors? Real routers use a CLI that is command based, like IOS, TiMOS or Junos. These interfaces work well over low bandwidth connections (unlike web interfaces), can work with config backup systems like RANCID, have a (mostly) consistent structure and good show commands. However vendors of low cost routers/switches/muxes seem to take a stab in the dark and produce some really nasty stuff. I have a personal hate of text based menus and binary config backup files. Doe this p*** off anyone else? The business part of the company says "This device is great! It's cheap and does everything." However the poor sap who is given the task to make it work has to wrestle with a badly designed user interface and illogical syntax. Maybe the vendors need some sort of best practices guide for what manageability features their kit needs to support to make them acceptable to the market. Does anyone know if there is anything along these lines?
Jonathon.
This email and attachments: are confidential; may be protected by privilege and copyright; if received in error may not be used, copied, or kept; are not guaranteed to be virus-free; may not express the views of Kordia(R); do not designate an information system; and do not give rise to any liability for Kordia(R).
This email and attachments: are confidential; may be protected by privilege and copyright; if received in error may not be used, copied, or kept; are not guaranteed to be virus-free; may not express the views of Kordia(R); do not designate an information system; and do not give rise to any liability for Kordia(R).