My apologies you are correct. AFAIK killspike only works on rrdtool based set ups. If you have to use the old mrtg log system then it wouldn't help you in this case. If you were using MRTG with rrdtool you wouldn't have any issues however. Not sure if it's possible in your deployment but this might help you. http://oss.oetiker.ch/mrtg/doc/mrtg-rrd.en.html Good luck, sorry to lead you astray. -Tim Eberhard On Wed, Jan 14, 2009 at 11:12 AM, Gregory Edigarov <greg@bestnet.kharkov.ua>wrote:
Tim,
Forgive me if I'm mistaken, but AFAIR killspike works with rrdtool, while i need to do magic on an old mrtg log format.
-- With best regards, Gregory Edigarov
Tim Eberhard wrote:
I would suggest looking at Killspike. Works wonders in Cacti (A mtrg based app)
Good luck,
-Tim Eberhard
On Wed, Jan 14, 2009 at 10:37 AM, Gregory Edigarov < greg@bestnet.kharkov.ua <mailto:greg@bestnet.kharkov.ua>> wrote:
Hello,
I have some problems with peaks on my mrtg, therefore I went to list archives on mrtg,org, and saw what's available. Then I found out that there is some script called flattengraph.pl, which I believe could help me with the situation. However this program is not available anymore and I cannot find and download it anywhere. So if some good soul will give me a link, or send me the file, I will be really grateful.
Thanks a lot in advance.
-- With best regards, Gregory Edigarov