|-----Original Message----- |From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu]On |Behalf Of Jared Mauch |Sent: Friday, March 22, 2002 10:14 AM |To: Adam Spann |Cc: 'nanog@merit.edu' |Subject: Re: SNMP and BGP | | | | Please ask your vendors to implement the |bgp mib v2 draft.. or at least the received routes info. |(draft-ietf-idr-bgp4-mibv2-02.txt) | | They already display it in their various CLIs. (juniper+cisco for |example). | | They have the number available. it should be easy to reveal these |in snmp for reliable accurate polling. | | - Jared | Hi, I suppose there is vendor watching this thread. I also propose adding current BGP table version number into the BGP-MIB, because checking this number at regular time will give you an idea of your router bgp stability, without this MIB, I have to use script to parse router output (as mentioned in another post related to routing table oscillation) best, Yu Ning ______________________________________ (Mr.) Yu Ning, Chief Engineer ChinaNET (AS4134) Senior Support Internet Dep. DCBU, China Telecom Beijing, P.R.China +86-10-62072357 Personal Page-> http://navidog.126.com ______________________________________