8 Oct
2020
8 Oct
'20
5:37 a.m.
<ISP hat on> After nearly 30 years of being a cisco shop, I'm working on configuring our first pair of Juniper MX204's to replace our current provider-edge cisco. I've worked through enough of the Juniper documentation/books to have a fairly good handle on how to configure these, but I wanted to check with the list to see if there are any Juniper-Specific gotchas I might run into that isn't documented well. I've done a bit of googling and am either finding stuff that is largely Cisco-specific or which is generic - all of which I'm rather familiar with based on my past history. Is there anything I should worry about which is Juniper-specific? -- - Forrest