I do not. But in the FCC’s Measuring Broadband America program (MBA) they have SamKnows measurement servers located in a few places so perhaps that is what they mean? See https://www.fcc.gov/reports-research/reports/measuring-broadband-america/mea... which says “The measurement servers were hosted by M-Lab and Level 3 Communications, and were located in ten cities across the United States near a point of interconnection between the ISP’s network and the network on which the measurement server resided.” In the newest (in process) report I believe they also added StackPath. Jason From: NANOG <nanog-bounces@nanog.org> on behalf of Bill Woodcock <woody@pch.net> Date: Thursday, October 31, 2019 at 11:58 PM To: Sean Donelan <sean@donelan.com>, North American Network Operators' Group <nanog@nanog.org> Subject: Re: FCC Takes Steps to Enforce Quality Standards for Rural Broadband On Oct 31, 2019, at 6:42 PM, Sean Donelan <sean@donelan.com<mailto:sean@donelan.com>> wrote: There is just so much I want to make sarcastic comments about, but I worry about offending future potential employers (all of them). https://www.fcc.gov/document/fcc-takes-steps-enforce-quality-standards-rural... "The Bureaus required ETCs to perform speed and latency tests from the customer premises of an active subscriber to a remote test server located at or reached by passing through an FCC-designated Internet Exchange Point (IXP) and set a daily test period (requiring carriers to conduct tests between 6:00 p.m. and 12:00 a.m. local time) for such tests.” Anybody have a reference for the “FCC-designated IXPs?” And what distinguishes them from the actual set of IXPs? -Bill