Date: Tue, 16 Oct 2001 09:55:12 +0100 From: Kevin Gannon <kgannon@lancomms.ie>
I've been thinking about other information that could be conveyed in communities. For instance, bandwidth, delay and packet loss. If each router along the way modifies such a community (should probably be an extended one) then a much richer set of information would be available to multihomers to aid in route selection.
[ snip ] I'd toyed with the bandwidth idea... let's say that we create 0xffff:1, :2, :3, and :4 to mean sub-T1, T3, OC3, and >= OC12. Arbitrary and simplified for sake of example. Whenever a router forwards, it tags with the appropriate speed. Thus, if :1 is set, you _know_ this path has a sub-T1 link. Of course, some places might use bogus tags to try hiding their connectivity... but an upstream could use a route-map to let the truth escape. Thus, with proper administration by upstreams, !set{:1|:2|:3|:4} would indicate no participants along the way. However, if this were to gain momentum among the biggest three dozen ASen, I think that we'd have a very accurate system. Even the top one dozen could do a very good job, considering how many connect directly to them... Eddy --------------------------------------------------------------------------- Brotsman & Dreger, Inc. - EverQuick Internet Division Phone: +1 (316) 794-8922 Wichita/(Inter)national Phone: +1 (785) 865-5885 Lawrence --------------------------------------------------------------------------- Date: Mon, 21 May 2001 11:23:58 +0000 (GMT) From: A Trap <blacklist@brics.com> To: blacklist@brics.com Subject: Please ignore this portion of my mail signature. These last few lines are a trap for address-harvesting spambots. Do NOT send mail to <blacklist@brics.com>, or you are likely to be blocked.