Hello Jon & All, Yup sure did . Even got it from the horses mouth so to speak. But names have been remove to protect the guilty ;-). Hth, JimL (Just below) On Fri, 10 Sep 1999, Jon Fox wrote:
Ever find your problem? Most stuff like this I've seen has been due to flaky/misconfigured line hardware - had a frame circuit once that showed line/protocol both up, but gave CRCs on all data - turned out to be a DSU configured for 1 less channel than it was supposed to have...
Interested in the answer, -Jon
...snip...
bug in 12.0.4 involving the "new model" authentication stuff... 12.0.5 allowed for dialup to use new model but by default WAN links do not use new model and/or no ppp authorization over-rides new model... 12.0.4 does not, so PPP was trying to authenticate...
fix is to put
aaa authorization network foo none
into config and then
ppp authorization foo
into config for interface...
bullshit cisco stuff...
no ppp authorization
which is default on WAN should have done it, and indeed did do it on 12.0.5T ...snip...
+-----------------------------------------------------------------+ | James W. Laferriere | System Techniques | Give me VMS | | Network Engineer | 25416 22nd So | Give me Linux | | babydr@baby-dragons.com | DesMoines WA 98198 | only on AXP | +-----------------------------------------------------------------+