Can you paste a 'sh buff' in here as it looks like you are out of buffers. - Aaron Hughes - UltraNet Communications, Inc. - aaronh@ultra.net. On Tue, 9 Dec 1997, Adrian Chadd wrote:
%SYS-2-GETBUF: Bad getbuffer, bytes= 40470 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %SYS-5-CONFIG_I: Configured from console by vty1 (203.55.84.2) %SYS-2-GETBUF: Bad getbuffer, bytes= 38198 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %SYS-2-GETBUF: Bad getbuffer, bytes= 62691 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %SYS-2-GETBUF: Bad getbuffer, bytes= 38118 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial12/6, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial12/6, changed state to up %SYS-2-GETBUF: Bad getbuffer, bytes= 60021 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00 %SYS-2-GETBUF: Bad getbuffer, bytes= 56788 -Process= "<interrupt level>", ipl= 1 -Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
I have been getting pages of these lately.
Its a 7513 w/ dual RSP2 modules and 64mb RAM. Its running IOS 11.2(8) P w/
1 SSIP controller (8 Serial). 1 VIP2 controller (1 FastEthernet)(4 Serial). 1 FastEthernet/IEEE 802.3 interface(s) 12 Serial network interface(s)
Has anyone on the list come across this before?
Adrian