OK. Try to get PA-E3 cards support or ISL by fast ethernet at I/O board with any IOS except 11.1(17.3)CAA ... They incorporate new equipment into 11.1(...)CAA first, not into 11.2(xx)P. On Wed, 11 Mar 1998, Dustin Goodwin wrote:
Date: Wed, 11 Mar 98 10:57:09 -0500 From: Dustin Goodwin <dustin_goodwin@smb.com> To: nanog@merit.edu, stuartb@grasshopper.paradox.net.au Subject: Re: ios images ?
11.2(12) or higher is suppose to go GD. 11.1 and 11.3 are in serious question as far as ever reaching GD status. If you want full support from Cisco TAC run a GD version and run the mainline. Don't run P train or a none GD release. This will limit your in terms of hardware. For instance the RSP4 is a 11.2P feature not 11.2 feature. That is the safest most conservative position to take. Of course it is the least fun in terms of new software features and new hardware. But no one ever got fired for running a GD mainline release.
- Dustin -
______________________________ Reply Separator _________________________________ Subject: ios images ? Author: Stuart Bryant <stuartb@grasshopper.paradox.net.au> at sb-entsmtp Date: 3/11/98 9:53 AM
hi, were looking at various ios images to use so we can standardise across the network. were looking at ios version 11.2(9)P or 11.2(10)P
does anyone have any warstories to share about these ? good points/bad points ? things i should be watch out for ?
regards,
stuart bryant stuartb@paradox.net.au cabinet maker/plumber paradox digital ph +61 8 9201 9201 f +61 8 9201 9200 founding member: fellowship of beer. i used to bite (tm)
Aleksei Roudnev, Network Operations Center, Relcom, Moscow (+7 095) 194-19-95 (Network Operations Center Hot Line),(+7 095) 239-10-10, N 13729 (pager) (+7 095) 196-72-12 (Support), (+7 095) 194-33-28 (Fax)