On Mon, 2 Sep 2019, Hank Nussbacher wrote:
What about handling LAG on 1Gb/sec links? That is a major showstopper if indeed it is missing:
It works, but only about as well as anything else to do with 1G interfaces works on the MX204, and only then when you're running at least 18.1R3...
show version |match "(model|junos):" Model: mx204 Junos: 18.1R3-S4.2
show interfaces ae0 |match speed Link-level type: Flexible-Ethernet, MTU: 1522, Speed: 40Gbps,
show lacp interfaces ae0 |find protocol LACP protocol: Receive State Transmit State Mux State xe-0/1/4 Current Slow periodic Collecting distributing xe-0/1/5 Current Slow periodic Collecting distributing xe-0/1/6 Current Slow periodic Collecting distributing xe-0/1/7 Current Slow periodic Collecting distributing
show chassis hardware |match SX Xcvr 4 REV 02 740-011613 - SFP-SX Xcvr 5 REV 02 740-011613 - SFP-SX Xcvr 6 REV 02 740-011613 - SFP-SX Xcvr 7 REV 02 740-011613 - SFP-SX
show interfaces xe-0/1/4 |match speed Speed: 10Gbps, BPDU Error: None, Loop Detect PDU Error: None, Flow control: Disabled, Speed Configuration: 1G
It just gets more bizarre from there. Don't run 1G on these boxes if you can find any way to avoid it. -Rob