I do not know how it's about Sprintlink now; it was published there (ftp.sprintlink.net) about 3 - 56 years ago. You can ask Vadim directly. You can found modified 'snmpstatd' and WWW interface for it at http://noc/bn.ru/~alex/STAT.tar.gz It's where you can get it just now. It's _shareware_ (you can use, install, try etc; write me please if it appear to be usefull or if you need some support). The issues about an old code incorporated into 'snmpstatd' and written by V. Antonov you can ask Vadim directly (avg@kotovnik.com). Through I wonder how sometimes this _simple_ systems (about 10 - 30,000 lines of code) can be used instead of huge and very expansive systems (another example - CISCO configurations from WWW and the samples). Alex. On Thu, 10 Jun 1999, Bryan Venable wrote:
Date: Thu, 10 Jun 1999 09:16:57 -0500 From: Bryan Venable <bryanv@savvis.net> To: nanog@merit.edu Subject: Re: HP Openview Slowness.
Alex,
I did some web searches and an FTP search for snmpstatd, with no useful results - just a page referring me to your setup (password-protected) and an ISI report which credits it. I also found Vadim Antonov's home page, but there's no reference to it there either. ftp.sprintlink.net doesn't exist anymore. Do you know where one can find snmpstatd nowadays?
Thanks.
"Alex P. Rudnev" wrote:
This is _freeware_ snmpstatd written originally by Vadim Antonov (avg@kotovnik.com), and published (with the Sprint's permission) on the Sprint ftp server.
I'v modified it, add WWW interface, operator's log, different WWW reports and graphs, data base describing the channels and routers.
It monitor - routers, links, BGP connections (and there is additional tool monitored cisco access servers with the modem pools and compatible with the first one interface); play music in case of important event (by MIDI), allow operator to open object, read the card describing it, send e-mail to the owner, investigate the problem and change the status (something like _ERROR -> ERROR at TELCO, investigations are keep on).
The main disadvantage is that I can't draw map's (and have not good idea how to do it, yet, through there is some drafts about it). But it works fine and allow us to generate configuration from the data base (if we add new link to the data base, it's added to the monitor authomatically), etc etc.
The other disadvantage is that all menu was written on RUSSION (it can be changed, through). And the documentation is not in the xecellent form yet.
This tool is used by KIAE TECHNICAL center to monitor:
RELCOM IP network RELARN IP network RELARN ATM SWITCH network (with some part of mgrt) RBNET IP network Internal KIAE switched network; RELCOM switches;
and by a few of other ISP here in Russia.
On Thu, 10 Jun 1999, David M. Archer wrote:
Date: Thu, 10 Jun 1999 08:48:56 -0400 From: David M. Archer <dmarcher@pobox.com> To: "Alex P. Rudnev" <alex@Relcom.EU.net> Subject: Re: HP Openview Slowness.
Btw, see http://noc.bn.ru/~alex/MON/ for an example of 'snmpstatd' output.
Where does this snmpstatd come from?
Dave
Aleksei Roudnev, Network Operations Center, Relcom, Moscow (+7 095) 194-19-95 (Network Operations Center Hot Line),(+7 095) 230-41-41, N 13729 (pager) (+7 095) 196-72-12 (Support), (+7 095) 194-33-28 (Fax)
-- Bryan Venable TAC2 Systems Engineer SAVVIS Communications (314) 719-2467
Aleksei Roudnev, Network Operations Center, Relcom, Moscow (+7 095) 194-19-95 (Network Operations Center Hot Line),(+7 095) 230-41-41, N 13729 (pager) (+7 095) 196-72-12 (Support), (+7 095) 194-33-28 (Fax)