Well I found my 6to4 gateway: traceroute to 192.88.99.1 (192.88.99.1), 30 hops max, 40 byte packets 10 te3-3.ccr01.ind01.atlas.cogentco.com (154.54.3.30) [AS174] 244.965 ms 244.964 ms 244.952 ms 11 38.20.52.226 (38.20.52.226) [AS174] 244.336 ms 38.20.52.222 (38.20.52.222) [AS174] 244.300 ms 266.250 ms 12 38.104.214.6 (38.104.214.6) [AS174] 326.141 ms 326.139 ms 376.926 ms 13 ge-7-0-0.103.rtr.ictc.indiana.gigapop.net (149.165.254.142) [AS10680] 612.357 ms 612.367 ms 612.358 ms 14 rtr3.ul.indiana.gigapop.net (149.165.255.129) [AS10680] 376.777 ms 319.641 ms * and I have so much issues with 6to4 that I have decided to disable it at home (airport extreme). I found out PTB was not transmitted and using scamper and the help of Matthew Luckie there is an odd MTU of 1422 from Internet to me. I suspect the 6to4 relay did not put the MTU to 1280 to be on the safe side... (I saw a recommendation like that on the net). I have seen that the new hardware of the airport extreme has a new firmware that does more IPv6 magic, but old hardware are not yet benefiting this new firmware... Once a new firmware comes I'll re-enable and see... PS: I found scamper to be a very good troubleshooting tool (once you know what to do) and wish it would be on all OS, like traceroute and now tracepath is... ----- Original Message ----- From: "Jack Bates" <jbates@brightok.net> To: "Franck Martin" <franck@genius.com> Cc: "John Jason Brzozowski" <john_brzozowski@cable.comcast.com>, "NANOG" <nanog@nanog.org> Sent: Tuesday, 31 August, 2010 9:44:11 AM Subject: Re: Comcast enables 6to4 relays Franck Martin wrote:
Is there a list of 6to4 relays?
I'm curious.
Also, I'm also curious to know if ISPs in Europe (which are more advanced in IPv6 deployment) have experienced the same issues?
Sprint has one which is absolutely horrible (or was a year or two ago). I'd recommend any and every ISP to setup a 6to4, even if it runs over a v6 tunnel to HE. Accidentally getting one from someone else can give you exceptionally broken 6to4 connectivity. Being anycast, I'd say routeviews might be a good place to check for some, but often times they are hidden within the networks they serve. That being said, 6to4 itself is often horrible. It works fine if you are talking 6to4 direct to the remote site (vs using a relay), but relays often break and are hard to troubleshoot due to their nature.