We're doing something similar - VACLs (using the "redirect" action) with port-channel destinations on a span aggregation 650x. If you've got a spare 650x chassis lying around and your configuration requirements aren't terribly complex/dynamic, you can do monitoring with filtering and load-balancing at high-throughput on it. On 03/01/12 06:03, David Swafford wrote:
Take a look at VACLs on the Cat side. It has a capture feature that is effectively the same as a local SPAN, but without the 2 session limit. If you do a lot of RSPAN though, this wouldn't be your complete answer (VACL captures are local only). VACLs are a bit more granular in defining what's captured, if say for example you only wanted traffic destined to TCP/80, you could configure it that way.
David.
On Thu, Mar 1, 2012 at 5:52 AM, Terry Baranski < terry.baranski.list@gmail.com> wrote:
On Mar 1, 2012, at 02:13 AM, apishdadi@gmail.com wrote:
Hello All,
We are looking for a switch or a device that we can use for mirroring tap ports. For example , take a mirror port off of a core router say a 6509, connect it to a port on said device, say port 1. I would like then to be able to mirror port 1 on said device to multiple ports, like port 2 , 3, 4. We have the need to analyze traffic from one port on multiple devices. Seems most switches are limited to mirroring to a max of 1 or 2 ports.
We like Gigamon for this purpose.
-Terry