Question: WHen you have a peer configured in a peer group the peering session policy is implemenated according to the peer group definition ie: <bigger>neighbor testgroup peer-group neighbor testgroup remote-as 2493 neighbor testgroup update-source Loopback0 neighbor testgroup send-community neighbor testgroup version 4 neighbor testgroup route-map mci-bbone out neighbor testgroup filter-list 70 out </bigger> <bigger>neighbor 130.200.17.250 peer-group testgroup neighbor 150.300.12.13 peer-group testgroup Why is it that when I try to remove the filter-list statement out of the peer group definition it gives me an error?? It appears you cannot assign different filter-lists to individual members of a peer-group. ie no neighbor testgroup filter-list 70 out = works OK then .. neighbor 130.200.17.250 filter-list 70 out produces this error % Invalid command for a peer-group member </bigger>I am trying to apply a different filter-list to different members of the same peer group. Can anyone offer their advice/experience greatly appreciated - I am definitly stuck here! Andrew --------------------------------><<------------------------- Andrew Brown - Internetwork Design Engineer - Service Development iSTAR internet inc Tel: (613)780-2210 250 Albert Street Fax: (613)780-6666 Ottawa, Ont, Canada K1P 6M1