Matt Harris
|
Infrastructure Lead
816‑256‑5446
|
Direct
Looking for help?
Helpdesk
|
Email Support
We build customized end‑to‑end technology solutions powered by NetFire Cloud.
On Thu, Feb 10, 2022 at 12:03 PM William Herrin <bill@herrin.us> wrote:
Hi folks,

Do you have any recommendations for VPN appliances? Specifically: I need to build a site to site VPNs at speeds between 100mpbs and 1 gbit where all but one of the sites are behind an IPv4 NAT gateway with dynamic public IP addresses.

Normally I'd throw OpenVPN on a couple of Linux boxes and be happy but my customer insists on a network appliance. Site to site VPNs using IPSec and static IP addresses on the plaintext side are a dime a dozen but traversing NAT and dynamic IP addresses (and automatically re-establishing when the service goes out and comes back up with different addresses) is a hard requirement.

For OpenVPN, I like the Netgate boxes running pfsense. Works great, super easy integrations with stuff like AC/LDAP/radius/etc for auth, frr and others for your routing, etc. This is probably your best bet. 

For IPSec I tend to stick to Juniper SRX boxes. 

Good luck!