Yup, Tried that. Incoming interface is set as: interface Ethernet1/37 switchport mac-learn disable description tor-31-1 ge-0/0/44 SPAN switchport mode trunk switchport trunk allowed vlan 2,999 ip access-group DROP out Outbound interfaces are set to: interface Ethernet1/46 description MON1 switchport access vlan 999 The issue is that the traffic coming in, is coming from a Juniper switch where the traffic has vlan tags on the packets. On Mon, Oct 7, 2019 at 1:07 PM Nick Hilliard <nick@foobar.org> wrote:
Dovid Bender wrote on 07/10/2019 17:56:
We used cisco in the past. The issue we have is the switches that will mirror to more than one port have fans pushing the heat into the cold isle. From what I was able to see Cisco does not have any AFO switches that will mirror to more than one port.
um, really? Have you tried disabling mac learning? This will cause all traffic to be unicast flooded to multiple ports.
Nick