A single linux box with a whole /24 on it? What sort of use case is that, BTW? On 19-Jul-2014 10:26 pm, "Abuse Contact" <stopabuseandreport@gmail.com> wrote:
I know, the DC is going to be giving me a BGP session on their router so I can set it up, I'm not using a Linux server as a router.
On Sat, Jul 19, 2014 at 9:04 AM, William Herrin <bill@herrin.us> wrote:
On Wed, Jul 16, 2014 at 4:05 AM, Abuse Contact <stopabuseandreport@gmail.com> wrote:
So I just purchased a Dedicated server from this one company and I have a /24 IPv4 block that I bought from a company on WebHostingTalk, but I am clueless on how to setup the /24 IPv4 block using the BGP Session. I want to set it up to run through their network as if it was one of their IPs, etc. I keep seeing things like iBGP (which I think means like a inner routing BGP) and eBGP (what I'm talking about??) but I have no idea how to set those up or which one I would need.
Howdy,
Unless you have (1) a real router available, not a just a server and (2) an expert available to help you with your first BGP configuration I strongly recommend you simply ask your service provider to announce the /24 to the Internet on your behalf.
Server-based BGP software like Quagga for Linux is reasonably good but it should absolutely not be involved in your _first_ attempt to connect with the Internet's default-free zone. Simple mistakes with eBGP can cause tremendous damage to other folks on the Internet. Trial and error is simply not OK. If it isn't worth it to you to buy a BGP-capable router then you also aren't prepared to make the investment in learning it takes to use BGP without causing harm.
Regards, Bill Herrin
-- William Herrin ................ herrin@dirtside.com bill@herrin.us Owner, Dirtside Systems ......... Web: <http://www.dirtside.com/> Can I solve your unusual networking challenges?