Hi, Michael: 1) " ... While you may be able to get packets from point A to B in a private setting, using them might also be .. a challenge. ... ": EzIP uses 240/4 netblock only within the RAN (Regional Area Network) as "Private" address, not "publicly" routable, according to the conventional Internet definition. This is actually the same as how 100.64/10 is used within CG-NAT. 2) However, this might be where the confusion comes from. With the geographical area coverage so much bigger, an RAN is effectively a public network. To mesh the two for consistency, we defined everything related to 240/4 as "Semi-Public" to distinguish this new layer of networking facility from the current public / private separation. That is, the CG-NAT routers will become SPRs (Semi-Public Routers) in EzIP's RAN, once the 240/4 is deployed. Hope this helps, Abe (2024-01-11 12:21) On 2024-01-10 10:45, Michael Butler via NANOG wrote:
On 1/10/24 10:12, Tom Beecher wrote:
Karim-
Please be cautious about this advice, and understand the full context.
240/4 is still classified as RESERVED space. While you would certainly be able to use it on internal networks if your equipment supports it, you cannot use it as publicly routable space. There have been many proposals over the years to reclassify 240/4, but that has not happened, and is unlikely to at any point in the foreseeable future.
While you may be able to get packets from point A to B in a private setting, using them might also be .. a challenge.
There's a whole bunch of software out there that makes certain assumptions about allowable ranges. That is, they've been compiled with a header that defines ..
#define IN_BADCLASS(i) (((in_addr_t)(i) & 0xf0000000) == 0xf0000000)
Michael
-- This email has been checked for viruses by Avast antivirus software. www.avast.com