i am not really sure what kind of traffic we are talking about, but if its around 100Mbits/sec or so bandwidth, TurboACL should do it just fine (around ~20% or lower CPU usage on a 7206VXR with NPE-G1)
most likely the pps would kill the 5500 long before the bps :( especially if you want to route/acl it.
yea you're right.. for that "100Mbits/sec" bps i mentioned, the pps at that rate was around 20,000 pps inbound as well as 18,000 pps outbound. -hc
-hc
On Tue, 25 Mar 2003, John Kristoff wrote:
On Tue, 25 Mar 2003 09:06:01 -0500 Christian Liendo <cliendo@globix.com> wrote:
I am sorry if this was discussed before, but I cannot seem to find this. I want to use source routing as a way to stop a DoS rather than use access-lists.
If you fooled the router into thinking that the reverse path for the source is on another another interface and then used strict unicast RPF checking, that may accomplish what you want without using ACLs. I don't know what impact it would have on your CPU however, you'll have to investigate or provide more details.
Note, depending on the platform and configuration, filters/ACLs may have an insignficant impact on the CPU. If they don't, don't forget to complain to your vendor. :-)
John