Hi, How to get link-local address from BIA. I have seen some information on Internet but it is not working for all. ============= The BIA in this case is cc00.0bfc.0000. The rules for the modified EUI-64 addressing are: •FFFE will be put in between the vendor-id (3 most significant bytes) and the extension-id (3 least significant bytes), which will lead to cc00.0bFF.FEfc.0000 •Thereafter the seventh bit, known as universal/local bit, gets inverted. So first change the cc00 from hex to binary, which leads to 110011 0 000000000 and then invert the seventh bit (here a 0): 110011 1 000000000. Moved back to hex this will give CE00 •At last, change all points ‘.’ to colons ‘:’ and delete all leading zeros, then you got your link-local IPv6 address: FE80::CE00:BFF:FEFC:0 ============ So if your BIA is 0008.209a.081b (bia 0008.209a.081b), how link-local be calculated. This is the link-local on router => IPv6 is enabled, link-local address is FE80::208:20FF:FE9A:81B Also on XR below is the link local address Loopback6 is Up, ipv6 protocol is Up, Vrfid is default (0x60000000) IPv6 is enabled, link-local address is fe80::884c:2dff:fe84:8d75 I can not see any interface with BIA ending with 75 ... Can someone explain me this? Regards, Vikas