I'll use your reply as a template: Device naming convention: <2 letters of the state/province abbreviation> <3 letters of city code> <3 letters of POP location> <unless there is only one POP in the city, then this field is blank> <1 letter describing device type> a = RAS Server/Access device (including remote console devices) s = Switch r = Router <2 letter device abbreviation> 12 = Cisco 12000 Series 75 = Cisco 7500 Series 50 = Cisco Catalyst 5000 Series 65 = Cisco Catalyst 6500 Series p3 = Lucent PM3 58 = Cisco AS5800 etc.. <2 digit device sequence identifier> <x letter/digit interface ID/number> Examples: ON-TOR-FRN-R12-01-POS11-2 Ontario, Toronto, Front St. Cisco 12000, #1, POS, slot 11, port 2 BC-VAN-HBR-R75-04-A9-0-1 British Columbia, Vancouver, Harbour Center, Cisco 7500 Series, #4, ATM, linecard 9, slot 0, interface 1 AB-CAL-A53-01-32 Alberta, Calgary, Cisco AS5300, #1, dialup port 32 NOTE: DNS for the devices themselves (for telnet, ssh, snmp, etc) are identicle to the above, except the interface information is not included. ie: ON-TOR-FRN-R12-09.LOOK.CA
-----Original Message----- From: Przemyslaw Karwasiecki [mailto:karwas@ifxcorp.com] Sent: Wednesday, January 24, 2001 10:36 AM To: Kurt Erik Lindqvist; nanog@merit.edu Subject: RE: Labeling and naming
Hello,
We are currently trying to resolve the very same issue. So far we plan to use following scheme:
1) Device name should be concatenation of following parts:
<2 letters of ISO country code> http://www.bcpl.net/~jspath/isocodes.html <3 letters of airport city code> http://www.ufreight.com/faq/airport_code/airport_code_by_ac.html <3 letters of location> to be created <4 letters of device name abbreviations> to be created -- in case of cisco: model number <1 letter separator> arbitrary decided to be capital letter X (no DNS nor arithmetic exp problems) <1 letter device ordinal> can be hex if needed
Examples: USMIANOC3662X1 - Miami Lakes NOC cisco 3662 USMIATPL7206X1 - Miami Teleplace cisco 7206 USMIANAPJM20X1 - Miami NAP Juniper M20 VEBRMPOP2501X1 - Venezuela, Barquisimento POP, VE cisco 2501 VACCSCTV1010X1 - Venezuela, Caracas CANTV collocation, cisco Lightstream 1010
2) We will also create DNS zone ???core.net which will be used in two main ways:
a) reverse DNS lookup, to map IP addresses into hierarchical names, like:
serial1-0-0-128-<customer_name>.USMIATPL3662X1.TelePlace.mia.u s.ifxcore.net This will be mainly used for tools like traceroute, etc.
b) straight DNS lookups of devices itself, like: USMIATPL3662X1.ifxcore.net This will be used to get easy access to a device itself (through Loopback), and due to mnemonic nature of device name should be easy to memorize.
So far the only problem we run into with this scheme is 12 character limit on hostnames on some boxes.
Przemek
-----Original Message----- From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu]On Behalf Of Kurt Erik Lindqvist Sent: Wednesday, January 24, 2001 9:21 AM To: nanog@merit.edu Subject: Labeling and naming
For a project I am currently working on I stumbled upon the following. What is the best way to lable and name equipment? Although this applies to all equipment such as SDH ADMs, IP, ATM etc I realised that it seems to be hardest to find a sensible convention for IP equipment. Preferably I would like to find a convention that fits all, but I guess that is utopia.
So, since list contains, PTTs, Telcos, ISPs and wannabees is there any good common scheme or pointers to something useful?
- kurtis -
-------------------------------------------------------------- ----------- This email server is running an evaluation copy of the MailShield anti- spam software. Please contact your email administrator if you have any questions about this message. MailShield product info: www.mailshield.com .