Hi Gerald - If you search the list for ip load-sharing per-packet you will see how we manage all of our multi-customer T1s. Never had any long term luck with MLPPP. On Wed, 13 Oct 2004 17:47:18 -0400 (EDT) Gerald <gcoon@inch.com> wrote:
I've got what seems to me like an innocuous question for this list...
Someone is requesting access to about 3 mb of traffic up/dn. I figure 2 T1s will give them the 3 Mb I need, but I'm looking for suggestions on either efficiently combining those 2 to get the most bandwidth for their buck or else I have to look at getting them a ds3 and scaling back to what they need.
Is there an good low end suggestion for making effective use of 2 T1s to give 3 Mb of bandwidth? In practice, I've seen 2 T1s load balanced with CEF not do very well at giving a full 3 Mb. (This was without turning on per-packet CEF)
I'm not personally experienced with MLPPP or mux hardware if that helps, but I could get it set up if that's the consensus as the best option. The NRC of something that would effectively couple the 2 T1s would easily beat the MRC of a DS3 which I think might be overkill for just 3 Mb.
Thanks for suggestions and tips.
Gerald
****************************************** Richard J. Sears Vice President American Digital Network ---------------------------------------------------- rsears@adnc.com http://www.adnc.com ---------------------------------------------------- 858.576.4272 - Phone 858.427.2401 - Fax INOC-DBA - 6130 ---------------------------------------------------- I fly because it releases my mind from the tyranny of petty things . . "Work like you don't need the money, love like you've never been hurt and dance like you do when nobody's watching."