How many bgp prefixes do you have? Can you just put statics on router 2? On Apr 18, 2011, at 8:26 PM, "David Swafford" <david@davidswafford.com> wrote:
What's the real goal behind this? What your describing sounds like a horrible band-aid....
David.
On Mon, Apr 18, 2011 at 5:08 PM, Andrey Khomyakov < khomyakov.andrey@gmail.com> wrote:
Hi nanog
I need to advertise EIGRP route with a different next-hop value than self
Due to how the connections are setup, I have to run BGP between two peers that are 3 hops away from each other.
router1--router2--firewall--router3 I'm running EBGP between router1 and router3 router1 is redistributing into EIGRP that's running with router2
The problem is that now router2 thinks that router3 routes are reachable via router1 so I have myself a route loop.
Is there a way to advertise an EIGRP route with next hop of router3 (or firewall for that matter) rather than router1 which is what EIGRP does by default
Thank you in advance for advice.
-- Andrey Khomyakov [khomyakov.andrey@gmail.com]
Confidentiality Notice: This e-mail message (including any attached or embedded documents) is intended for the exclusive and confidential use of the individual or entity to which this message is addressed, and unless otherwise expressly indicated, is confidential and privileged information of Rackspace. Any dissemination, distribution or copying of the enclosed material is prohibited. If you receive this transmission in error, please notify us immediately by e-mail at abuse@rackspace.com, and delete the original message. Your cooperation is appreciated.