Re: J-series and Cisco ME3400 L2 Issues

On Wed, Feb 11, 2009 at 11:57:01AM -0600, Brad Fleming wrote:

We've seen a problem getting Layer2 to function correctly with various speed and duplex settings. We tried every combo of hardcoded settings on both sides but simply couldn't resolve some L2 errors and interface resets. In the end, we found a stable setup with the J-series set to auto/auto and the ME3400 set to 100/full.

What were the L2 errors? You might try asking your question on the juniper-nsp [1] and cisco-nsp [2] lists. [1] http://puck.nether.net/mailman/listinfo/juniper-nsp [2] http://puck.nether.net/mailman/listinfo/cisco-nsp