Thanks for suggestion, as per previous, how easy it to configure? It needs to be understood by laymen if possible, i'm no layman, but im no carrier grade networking guru either, most my setups are 300 odd users, where the gateway and dslam method is cost feasible, but not when your looking at the numbers of this project - hence reason for my post :) Cheers On 5/4/20, Mel Beckman <mel@beckman.org> wrote:
We’ve been implementing similar DSL systems at large campgrounds for years. There are a huge number of high-density DSLAM solutions out there, and DSL CPE cost practically nothing. As you say, $25K is plenty to pay for the hardware, and a rack is plenty of space. The most time consuming part is wiring the existing POTS lines into amphenol connectors to plug into the DSLAM, 25 pairs at a time.
In addition to Calix\Occam, Adtran‘s TotalAccess solution is worth looking into for their carrier-class support.
-mel beckman
On May 3, 2020, at 5:09 AM, Mike Hammett <nanog@ics-il.net> wrote:
If you were to outfit them with three chassis of Calix\Occam B6-252s, you'd be under $25k for the whole thing and get ADSL2+ speeds. You would need most of a rack to do it.
Other platforms may or may not be more cost effective or a better solution. Just throwing the idea out there.
----- Mike Hammett Intelligent Computing Solutions<http://www.ics-il.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/ICSIL>[http://www.ics-il.com/images/googleicon.png]<https://plus.google.com/+IntelligentComputingSolutionsDeKalb>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/intelligent-computing-solutions>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/ICSIL> Midwest Internet Exchange<http://www.midwest-ix.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/mdwestix>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/midwest-internet-exchange>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/mdwestix> The Brothers WISP<http://www.thebrotherswisp.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/thebrotherswisp>[http://www.ics-il.com/images/youtubeicon.png]<https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> ________________________________ From: "Nick Edwards" <nick.z.edwards@gmail.com> To: "Jeremy Austin" <jhaustin@gmail.com> Cc: nanog@nanog.org Sent: Sunday, May 3, 2020 12:21:17 AM Subject: Re: alternative to voip gateways
The huts or cabins whatever you want to call them, are right behind the admin building at entrance, so first is about 300 meters and the furtherest is just under 1 mile
Cost will be an issue, Im sure I will have no problems if I have to install a full rack of gateways and another full of dslams if it costs 150K, over something 1/5th the size in one rack that will cost 200k - since the company is not charging them for internet or voice.
On 5/2/20, Jeremy Austin <jhaustin@gmail.com> wrote:
What’s the average loop length? Grandstream is probably OK to 5+ kfeet but you will lose CID before that.
As the low cost option don’t expect them to be trouble-free (or have particularly good vendor support), but they might work in your application if cheap is what makes sense.
My $.02
Jeremy Austin
On Fri, May 1, 2020 at 10:11 PM Andrey Slastenov <a.slastenov@gmail.com> wrote:
Look at MSAN solution. Like Huawei UA5000 or similar solutions from other vendors.
Regards, Andrey
2 мая 2020 г., в 07:21, Nick Edwards <nick.z.edwards@gmail.com> написал(а):
I'm looking at a new sister company we just took over, their remote village has 1700 analogue phone lines to the workers huts, but they go nowhere past the MDF.
The office runs voip, now i'm told i have to get phones to the workers because the <lots of explicit words> AKA previous owners of that business stopped the build when they ran into financial problems.
So my plan is to utilize the existing many miles worth of copper pairs.
I'm looking at throwing them into Versa Dslams that use pppoe pass through, throw in a mikoTik 1036 as pppoe server, and we got spare R710 i can use as radius server, and by my limited knowledge this works.
OK data done, but... now all those pots out lines need to go somewhere that can handle 1700 or more lines, I am looking at either grandstream 48 port FXS gateways or sangoma vega 50 ports (which Ill use as 48 so theres a 1:1 match with dslams) the vega 3050 probably wont be used because they are more than twice the price of grandstream.
But this all results in a sh1te load of 48 port gateways (power is not a concern), but wondering if there is another solution that is more cost effective? Seems the regular NEC's Siemens and so on might have an option but I can imagine it will be far more expensive than a bunch of individual gateways.
This project is in my mind workable, but i've not done such a thing on a large scale. Those who have experience in this field care to chime in? is my method acceptable or not for such a project size?
most pbx's I've done are only few hundred analogue lines where gateways are more suited and definitely more cost effective, at all our locations we use freepbx which works perfectly, and we know the beefyness of the box we'll need to install to handle this load, thats not a problem if we go down the gateway method.
thoughts?
-- Jeremy Austin jhaustin@gmail.com