I bought a Riverstone Rs-3000 for BGP with a single upstream provider. Great Deal. Now I am back to the Cisco Question. I have two options within my budget: 1) Catalyst 6006 w/ CATALYST 6000 SUPERVISOR ENGINE 1-A, 2GE, PLUS MSFC & PFC 2) CATALYST WS-X6248-RJ45, 48-PORT 10/100 FAST ETHERNET SWITCHING MODULE 3) DRAM UPGRADE to 256 on Supe Card. This system costs somewhere around 1300.00 more than a: Cisco 7505 w RSP4 256 Plus (2) VIP 2-50/128 and 3 PA-FE-TX Obviously the Catalyst is a better unit. But will it be as "burned in" and robust as the venerable 7505 ? I need to order by Monday A.M. as the router we have now - a 4840G is an extremely weird beast. Thanks Alexander Hagen Etheric Networks Incorporated, A California Corporation -----Original Message----- From: Robert E. Seastrom [mailto:rs@seastrom.com] Sent: Monday, February 09, 2004 4:59 PM To: Tom (UnitedLayer) Cc: Alexander Hagen; nanog@merit.edu Subject: Re: Cisco Router best for full BGP on a sub 5K bidget 7500 7200 or other vendor ? "Tom (UnitedLayer)" <tom@unitedlayer.com> writes:
On Sun, 8 Feb 2004, Alexander Hagen wrote:
The PA-2FE-TX is about 1600.00- better to get a second PA-FE-TX with second VIP2-50
Now why is the CX-FEIP-2TX so much cheaper than the PA-2FE-TX ?????
I believe because the CX-FEIP-2TX is a full length card. The PA-2FE-TX also isn't able to handle a full 100Mbps per port, so don't be suprised if it doesn't work well :)
VIP2/50 is a much better combo.
The reason that the CX-FEIP-2TX is so inexpensive is that it is interesting mainly as a curiousity of transitional technology. A CX-FEIP-2TX is VIP1, not a VIP2 (even a 2-15 or 2-20), and is incapable of being upgraded to do distributed anything, (cef, flow, whatever). It barely does full-duplex at line rate on one port, let alone two. Its sole use, if you happen to like to keep old hardware around, is that it will work in a 7000/7010 with RP/[S]SP, (ie, not an RSP). You can use them in a 7500 (or a 7000 with an RSP7k), but why would you want to? ---Rob