Some times ago, i would say 6 or 7 years, there was a BoF proposition at IETF to deal with such issue. Work areas were to propagate routing mesh configuration information and automatic assignment of subnet prefixes to links. There were quite a lot of persons interested in such issues and some drafts were proposed. The name of the BoF was zerouter. Unfortunately, the working group was not created despite some real interest. David
-----Message d'origine----- De : Mikael Abrahamsson [mailto:swmike@swm.pp.se] Envoyé : mardi 5 mai 2009 21:22 À : nanog list Objet : Re: Where to buy Internet IP addresses
On Tue, 5 May 2009, Jack Bates wrote:
What is missing, unless I've missed a protocol (which is always possible), is an automated way for a CPE to assign it's networks, pass other networks out to downstream routers in an on-need basis. I say on-need, as there may be 3 routers directly behind the CPE and each of those may get additional routers and so on and so forth. A presumption could be made that route efficiency is
Why wouldn't DHCPv6-PD work within the home as well as between the ISP and the home?
I see little reason why the main home gateway can't get a /56 from the ISP, and then hand out /62 (or whatever) to any routers within the home that asks for PD?
-- Mikael Abrahamsson email: swmike@swm.pp.se
********************************* This message and any attachments (the "message") are confidential and intended solely for the addressees. Any unauthorised use or dissemination is prohibited. Messages are susceptible to alteration. France Telecom Group shall not be liable for the message if altered, changed or falsified. If you are not the intended addressee of this message, please cancel it immediately and inform the sender. ********************************