Need to manipulate metric out to only one of the EIGRP neighbors only for default route. Trying to use distribute-list (can't think of anything else that can do that for me) The metric in the distribute-list does not seem to affect the default route at all. It still comes through with the metric of the redistribute command. I tried it in the lab and it worked. In the lab I used 3725 routers and physical interfaces. In production I have 4507R SUP6 and using a vlan interaface. Does anyone have any thoughts on why this does not work. Are vlan interfaces just not supported or is it a bug? Or am I misusing distribute-list all together? router eigrp 179 distribute-list route-map eigrp-redistribute-to-worcester out Vlan2517 network 0.0.0.0 redistribute static route-map eigrp-redistribute eigrp router-id 10.0.0.3 ip prefix-list all-routes permit 0.0.0.0/0 le 32 ! ip prefix-list eigrp-redistribute permit 10.0.28.0/24 ip prefix-list eigrp-redistribute permit 10.6.4.0/24 ! ip prefix-list eigrp-redistribute-default permit 0.0.0.0/0 ! ip route 0.0.0.0 0.0.0.0 192.168.168.10 ip route 10.0.28.0 255.255.255.0 192.168.168.22 ip route 10.6.4.0 255.255.255.0 192.168.168.22 ! route-map eigrp-redistribute permit 10 match ip address prefix-list eigrp-redistribute set metric 100000 1 255 1 1500 ! route-map eigrp-redistribute permit 20 match ip address prefix-list eigrp-redistribute-default set metric 100000 10 255 1 1500 ! route-map eigrp-redistribute-to-worcester permit 10 match ip address prefix-list eigrp-redistribute-default set metric 50000 10 255 1 1500 ! route-map eigrp-redistribute-to-worcester permit 20 match ip address prefix-list all-routes -- Andrey Khomyakov [khomyakov.andrey@gmail.com]