I don't mean to rain on your parade here...oh wait, yeah, I do actually. I have an SGI Indigo (MIPS R3000/25 with 32MB RAM baby, it's a screamer!) that still runs with no problems. Show me an eighteen year old router that's still up and running. The Dell hardware we ran NT4 Server on for providing DHCP until I replaced it is still as functional today as it was when it was purchased in 1998. I have a five year old Cisco doorstop. Don't tell me routers are made of magic hardware that is somehow immune to failure. Jamie -----Original Message----- From: Jimmy Hess [mailto:mysidia@gmail.com] Sent: Wednesday, February 02, 2011 11:48 PM To: Brandon Butterworth Cc: nanog@nanog.org Subject: Re: quietly.... On Wed, Feb 2, 2011 at 7:10 PM, Brandon Butterworth <brandon@rd.bbc.co.uk> wrote:
Just need to add default route in there and make dhcpd do RA then the user can turn off RA on their routers and not care that DHCPv6 doesn't include default router.
Having a DHCP server generate RA messages kind of defeats the point of having RA messages in the first place, resulting in loss of robustness, and now a new mode of failure. The point of having RA messages is they are simple, and integrated into the routers, so there is not a separate server to fail (a "DHCP server") to cause loss of connectivity, due to server appliances (computers) being less reliable than routers. With the RA integrated into the routers properly, clients can maintain connectivity (and establish connectivity, provided DNS details obtained in the past), even if DHCP server(s) should fail. -- -JH