On 26/12/2023 20:16, vom513 wrote:

I have a DSX8 that seemed to happily take a firmware upgrade, and after 
boot hangs at a specific point in kernel output every time.  

I've answer off-list, but I think it could be useful to someone else since the problem is the same for the DSX8 and SX16. 

I had a similar problem (mine is a SX16) it's not clear the root cause maybe a dirty filesystem, but the boot take about 15 minutes (while there is no output on the serial console and the network does not work) after that works just fine.


Leo


-- 
Leonardo Rizzi