I also have had good experience with (used) servertech/century/power tower (I think all the same brand) - very inexpensive; if you are in santa clara I have some spare 2u 16 port 208v (20a/c19) units. Here is something a buddy wrote up when we were wiring them to the user-accessable power on/off menu: http://blog.prgmr.com/xenophobia/2012/02/notes-on-setting-up-a-sentry-p.html My new rack is all avocent PM3001-401 units. Used, of course; but the feature I was after was per-port power monitoring. I haven't quite gotten 'em all the way figured out yet. One thing I see as a negative (but might be positive?) is that they have fuses, not breakers. I don't know if this provides better protection; I do know that when my buddy overloaded one of them in testing, I had to replace fuses, rather than just switching a breaker back. (also, when a different buddy plugged a ancient desktop (so old the PSU wasn't auto-switch) with the power input switch set to 110 in, it blew some of the fuses in the PDU (and took out the rack) - it didn't damage any of the other servers on the pdu (other than taking out the PDU; but everything came back up when I swapped it with my spare.) Also note, uh, the servertech and the avocent and I think all the other PDUs I've seen can reboot the management interface without flipping the outlets. I did it a bunch when I was getting familiar with the avocent. Yeah. I think I need to give fewer buddies access to production. Nobody takes hardware seriously enough. I can find people I trust with root, and that trust doesn't seem misplaced. But I let them touch the hardware? and they fuck it up. So I end up doing almost all the hardware stuff myself. On 06/23/2013 04:48 PM, Trey Valenta wrote:
I'll also throw out recommendations for ServTech PDUs. They have an affordable line of PDUs with static transfer switches that are particularly attractive for all your single-power-supply devices.