We opted for Adtran TA5000's with 48 port VDSL2 vectoring combo cards, going by expected losses we expect to have more than 50mbps d/l at all cabins, we are going to lock them at 50 anyway sincve we reply on RF to get data in first place. and use a central splitter to separate vdsl and POTS at each cabin, must like everybody did adsl, apparently this is largely how they do it in Europe vdsl and pots on same line (just on a much bigger scale than us). This gives them their high speed data and reliable POTS - since if the residential areas loses power, not relying on end user SIP, their voice will still work when their modems (and area) is without power. We were advised that having an inline microfilter - like adsl, would be more problematic at vdsl since it is essentially a bridge tap - something we all know is bad, it would be much greater issue, and the central splitter unit we looking at using allegedly avoids this problem. The cost of the cards (and chassis) would be not justified for small operations, but at our numbers its actually a cost saving over the dual devices path, as well as the metallic line testing ability. Thanks to all for advice. On 5/12/20, Michael Thomas <mike@mtcc.com> wrote:
On 5/11/20 1:31 PM, Mark Delany wrote:
We need to keep battery backup requirements, and expand them to all last mile IP bits. The need to call 911 has not gone away. For sure. I was merely observing that the conversion of POTS to VOIP in Australia didn't create a nation-wide disaster as the pearl-clutchers once predicted.
In fact, if anything, the same folk who complained about the so-called largesse of a nationwide IP last-mile are strangely silent now that WFH is de rigueur.
To your point, the original plan was 90+% passive optical back to major exchanges so the infrastructure was largely invulnerable to wide-scale power shutdowns/failures. All a residence has to do is feed a 7W NTD to stay connected.
Is this expecting ftth? Obviously things like DSLAM's and CMTS's require power. But all of this doesn't perfectly emulate the POTS requirements since it is my responsibility to feed power to the CPE my wifi routers, etc. What we saw last fall is that going long on gas/propane power generator companies is a pretty good bet and works fine in my neck of woods (in the boonies and the gold country) , but I don't see how that scales when you turn off the power to, oh say, Oakland or San Jose (or at least parts of them), which they did and will keep doing for the foreseeable future.
Mike