Karsten , thanks for replying.... It's like this I don't want to take router info, only thing i want is to graph the usage of my entire IP block per subnet wise. Normaly we are using CACTI , MRTG , Observium etc... to gather router information such as CPU , errors , usage etc... All the systems mentioned above use SNMP to gather info and when it comes to usage it only poll to a particular interface and plot the usage ......I hope you had an idea about my requirement :) On Tue, Feb 17, 2015 at 11:53 PM, Karsten Thomann <karsten_thomann@linfre.de
wrote:
Hi,
in this case I fully agree with Armin's advice, only wanted to provide a possible way to archive an easy result without activation of netflow/sflow which is possible if all subnets had dedicated ports somewhere in the net.
I don't know what information you want to get from your routers, as there are many ways to get a result depending on the information you want and the used vendors.
Regards Karsten
Thanks Armin , I will try the SW you have mentioned seems like it's not easy to install though :) :)
Karsten, I just bought out an example... my company has 2X18's and out of it we are using considerable amount of /24s to access internet . Some subnets are given without proper documentation , so it's very hard to do what you have proposed. What I can do is to install some kind of SW and gather info from my gateway routers :( .....it's helpful if some one can guide me through this :) ...
On Tue, Feb 17, 2015 at 5:34 PM, Karsten Thomann < karsten_thomann@linfre.de> wrote:
Hi,
I'm not sure how it is exactly build, but if every /29 uses it's own
Am Dienstag, 17. Februar 2015, 22:01:18 schrieb Methsri Wickramarathna: port
a tool like cacti/graphite where you're aggregating all required ports within one graph is easier.
Regards Karsten
Am 17.02.2015 12:47, schrieb Armin Kneip: Hi,
pmacct is your friend!
Regards, Armin
Am 17.02.2015 um 12:35 schrieb Methsri Wickramarathna:
Hi All, I have a requirement to plot a usage graph per subnet. As an example.
I have a 192.168.1.0/24 subnet divided among 32 customers where each one will get a /29 [ 192.168.1.0/29 => Customer A ; 192.168.1.8/29 => Customer B etc... ] ...
Is there any tool to graph the usage of entire /24 subnet ???
-- -- ________´$$$$`_____________________________,,,_ _______´$$$$$$$`_________________________´$$$` ________`$$$$$$$`______,,________,,_______´$$$$´ _________`$$$$$$$`____´$$`_____´$$`____´$$$$$´ __________`$$$$$$$`_´$$$$$`_´$$$$$`__´$$$$$$$´ ___________`$$$$$$$_$$$$$$$_$$$$$$$_´$$$$$$$´_ ____________`$$$$$$_$$$$$$$_$$$$$$$`´$$$$$$´_ ___,,,,,,______`$$$$$$_$$$$$$$_$$$$$$$_$$$$$$´_ _´$$$$$`____`$$$$$$_$$$$$$$_$$$$$$$_$$$$$$´_ ´$$$$$$$$$`´$$$$$$$_$$$$$$$_$$$$$$$_$$$$$´_ ´$$$$$$$$$$$$$$$$$$_$$$$$$$_$$$$$$$_$$$$$´_ ___`$$$$$$$$$$$$$$$_$$$$$$$_$$$$$$_$$$$$$´_ ______`$$$$$$$$$$$$$_$$$$$__$$_$$$$$$_$$´_ _______`$$$$$$$$$$$$,___,$$$$,_____,$$$$$´_ _________`$$$$$$$$$$$$$$$$$$$$$$$$$$$$$´_ __________`$$$$$$$$$$$$$$$$$$$$$$$$$$$´_ ____________`$$$$$$$$$$$$$$$$$$$$$$$$´_ _______________`$$$$$$$$$$$$$$$$$$$$´_ ~~( ŊëŌ )~~