Bench test of the system, with the muxes... sorry for the large pictures :) Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: Support@Snappytelecom.net ----- Original Message -----
From: "Luke Guillory" <lguillory@reservetele.com> To: "Faisal Imtiaz" <faisal@snappytelecom.net>, "Colton Conor" <colton.conor@gmail.com> Cc: "nanog list" <nanog@nanog.org> Sent: Monday, June 19, 2017 3:13:10 PM Subject: RE: DWDM Mux/Demux using 40G Optics
Faisal,
How would he inject his current 4x10 40g into the mux which is currently on a single LC cable?
Luke Guillory Network Operations Manager
Tel: 985.536.1212 Fax: 985.536.0300 Email: lguillory@reservetele.com
Reserve Telecommunications 100 RTC Dr Reserve, LA 70084
_________________________________________________________________________________________________
Disclaimer: The information transmitted, including attachments, is intended only for the person(s) or entity to which it is addressed and may contain confidential and/or privileged material which should not disseminate, distribute or be copied. Please notify Luke Guillory immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Luke Guillory therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. .
-----Original Message----- From: NANOG [mailto:nanog-bounces@nanog.org] On Behalf Of Faisal Imtiaz Sent: Monday, June 19, 2017 2:02 PM To: Colton Conor Cc: nanog list Subject: Re: DWDM Mux/Demux using 40G Optics
Answers in-line below.
If you look at the CWDM Muxes (8 or 9 channel) you will notice a common configuration of
Upgrade Port (expansion port) + 1450 or 1470 to 1610nm
in the DWDM muxes you will see them listed as # of Port + 1310 pass thru channel.
These are exactly what you are looking for ..... :)