Hopefully someone here has wrestled with serial server oddities and can shed some light on this... I've got a serial console server made by Digi (TS8 PortServer) setup in a fairly vanilla mode: 9600-8-N-1....telnet to port 500X gets you to port X. Setup for a vt100 terminal type. Other VTs I tried didn't seem to make a difference. Problem is when attached to a Cisco switch I had laying around I get seemily random garble output when accessing the console of a remote Cisco device. (e.g. "show run" will get a few garbled lines halfway through, Holding down Enter will produce some garbled text every few lines). When attached to a Juniper device everything appears normal. The problem follows the port if I swap the Cisco device to the port the J-box was on. Other issues I've noticed..cannot use arrow keys to search command buffer. My Google-fu is failing me in coming up with the right name for the effect I'm seeing... Thanks