Joe Shaw wrote:
On Wed, 9 Feb 2000, Dan Hollis wrote:
On Wed, 9 Feb 2000, Daniel Senie wrote:
Dan Hollis wrote:
An ascend TNT makes a rather nice smurf amp funny... there is a "Forward Directed Broadcast" option in the config. Turning this off does seem to work. Of course that doesn't mean folks HAVE turned it off...
Yup, makes you wonder why they havent done it
Ignorance is usually the problem here.
To be fair, Router Requirements (RFC 1812) required directed broadcast be on by default. RFC 2644/BCP 34 was only published in August 1999, changing the requirement to be OFF by default. Some router vendors, notably Cisco and Proteon (a.k.a. OpenROUTE, now NxNetworks) made the change prior to that new BCP, recognizing that melting down the Internet was the logical result of leaving directed broadcast turned on.
Doubly confusing if ascend hasnt made it default
The last time I installed a TNT it wasn't even an option. The last time I worked with any piece of Ascend gear (pipeline 85), the Forward Directed Broadcast option was set to yes by default. This may have changed since then.
The gear I recently installed was a MAX 6000, running software rev. 7.0.3. I suggest folks give consideration to upgrading to versions which support these features. -- ----------------------------------------------------------------- Daniel Senie dts@senie.com Amaranth Networks Inc. http://www.amaranthnetworks.com