Hi Marcel, I've personnel tested similar requirements on the followings; ASR1001 - 8G RAM ASR1001-X ASR1002 8G RAM with two eBGP sessions / full routes via two upstreams and mutiple iBGP sessions to the core. The ASR1K is a safe bet. The ISR G2 2921 or 2951 suffers under load if you have PBR or NAT/PAT rules. Hope this info helps with your research and router selections. Cheers, Ahad On Tue, Sep 26, 2017 at 7:29 PM, marcel.duregards--- via NANOG < nanog@nanog.org> wrote:
Dear Nanoger,
Anyone have an advice on CPE which can support the following features, please:
1) 1 Gigabits/s ipv4 or ipv6 forwarding IMIX or Internet traffic, full duplex (not sure if cisco or miercom are conducting bidirectionals traffic flows at the same time).
2) with ACLs and with uRPF with prefix filtering with bgp ext-communities (rfc 8092 would be a ++, but not mandatory)
3) with BGP full route, 1 eBGP session + 1 iBGP (--> multihomed, single attached solution, so there is 2 CPE connected to 2 bgp transit))
4) vrf light and SNMP + telnet/ssh with ACLs
Currently on Cisco side, we see the following candidates:
- ASR 1001-x - ASR 1002 - ISR 4431, 4451 - ISR G2 2921 + 2951 + 3925(E) (EoL soon, so we are currently in the process of evaluating other solution).
But we would like also to include other manufacturer : juniper, mikrotik , etc....
Thank for your help,
- Marcel