Yes, you have experienced what is known in the field as "air gap attenuation"--not something you want to depend on if you want a clean link! A close relative is "knot-in-the-fiber attenuation". Your subject says "GigE Media converter" but you say you are deploying an OC12. Which is it? Definitely invest in a light meter that can do the usual flavors of single and multimode, connector types, and at least 850 and 1310nm wavelengths. Then simply test strength of light on your receive port on each side, compare to specifications of your equipment, and add in-line attenuators as necessary. You'll usually find a range something like -3 to -27 dBm, and we prefer -15 dBm as our ideal. Also, make sure you've got the right type of fiber jumpers--mixing up single (yellow) and multi (orange) mode fiber can cause similar issues. Can't wait until more routers start to incorporate inline optical power readings in "show interface" commands the way Procket did :-) Cheers, -Lane On Tue, Aug 24, 2004 at 01:10:15PM -0400, kwallace@pcconnection.com <kwallace@pcconnection.com> wrote:
2 quick things come to mind-
single mode vs multimode, or the signal is too hot and you need attenuators.
-----Original Message----- From: owner-nanog@merit.edu [mailto:owner-nanog@merit.edu] Sent: Tuesday, August 24, 2004 12:48 PM To: nanog@nanog.org Subject: Weird GigE Media Converter Behavior
Hello all, wondering if anyone has seen or experienced this same problem. Currently deploying an OC12 on a campus network and am using Netgear media converters. Set up the lines and had lit fiber to the building I needed it to go to. On one end (main drop) I had light and tested the connectivity which worked fine, on the other side, when I jacked up my Netgear, it flickered. Now, when I went to swap out the fiber, I noticed a full contact between the wires and the converter dropped it out. Meaning if I had the wires not fully plugged it lit, if I plugged them entirely in, it dropped.
So... I ran to the other building and tried to replicate it there, and it did the same. I figured bad media converter so I swapped it out, next one worked fine. However, I took the media converter and swapped the funky acting one to yet another building and it worked fine. Anyone care to offer a thought on this? Relevant to my media converter? Bad line, "Murphy's Law", etc?
=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ J. Oquendo GPG Key ID 0x51F9D78D Fingerprint 2A48 BA18 1851 4C99
CA22 0619 DB63 F2F7 51F9 D78D http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x51F9D78D
sil @ politrix . org http://www.politrix.org sil @ infiltrated . net http://www.infiltrated.net
"How can we account for our present situation unless we believe that men high in this government are concerting to deliver us to disaster?" Joseph McCarthy "America's Retreat from Victory"