not on a 3640 running 12.0(1)T. (C3640-IS56I-M) Does return info though via a SNMP walk. No ATM interfaces either. doing the below on a 3662 running 12.1(3a)T1 (C3660-IS-M) with an ATM interface (4 port T1 IMA) shows another one "cable-docsis" cable-docsis faithfully pukes up all kinds of info try walking ".1.3.6.1" "ILMI" pukes. Going to be a long night .... Eric At 08:42 PM 2/26/01 -0800, David Schwartz wrote:
While I agree that "public" and "private" are "wellknowns," in most implementations, they at least show up in the code. Cisco chose to hide this one where it would not show up in the code. That IMHO is a very bad thing and does bad things to my confidence level in Cisco.
Do a "show snmp group" from an enabled console prompt. It does show.
DS
========================================================================== Eric Germann Inacom Info Systems egermann@inacomlima.com Lima, OH 45801 Ph: 419 331 9050 ICQ: 41927048 Fax: 603 825 5893 "It is so easy to miss pretty trivial solutions to problems deemed complicated. The goal of a scientist is to find an interesting problem, and live off it for a while. The goal of an engineer is to evade interesting problems :)" -- Vadim Antonov <avg@kotovnik.com> on NANOG